Model 3/Y Heated Steering Wheel Module
Last updated
Last updated
The heated steering wheel module (module) has already been set in heating mode by default. It is ready to use once the module is installed.
The module does not affect the OTA upgrade.
The module uses the steering wheel light as power supply. Heated feature would not work if you turn off the steering wheel lights.
When the car is turned on and the cabin temperature is below 29°C, the heating feature will activate. When the cabin temperature exceeds 29°C, the heating will turn off, and the cabin temperature will maintain 21°C for activation.
In this mode, the heated feature will activate when the cabin temperature is below 13°C. The heating will stop when the temperature exceeds 24°C. When the cabin temperature drops below 13°C, the heating will activate again.
Turn off the steering wheel lights. Then, press the right scroll wheel button and turn on the steering wheel lights, and release the scroll wheel.
TACC distance increase: Switching from High Threshold Mode to Low Threshold Mode
TACC distance decrease: Switching from Low Threshold Mode to High Threshold Mode
You can set your desired temperature between 22°C and 47°C.
Turn off the steering wheel lights. Then, hold the right scroll wheel to the right and turn on the steering wheel lights, and release the scroll wheel.
Wait for a few seconds until the cabin temperature stabilizes, then use the scroll wheel to increase or decrease the temperature. Press the right scroll wheel to the left decrease it by 1°C; press the right scroll wheel to the right increase it by 1°C.
Turn off steering wheel lights after the setting is completed.
You can disable the module in summer or before getting into service center.
Turn off the steering wheel lights. Then, press the right scroll wheel button to the left and turn on the steering wheel lights, and release the scroll wheel. This will disable the heating mode. The system will exit the heating mode, and the screen will not display any changes until you do the same setting again.
If you need to modify the setting, press the right scroll wheel to adjust: (All settings will be saved automatically after adjustment, and there will be no special operation needed.)
