Model 3/Y HDMI Interface

Model 3/Y HDMI InterfaceEVOffer

Product Compatibility

Variant A

• Tesla Model 3 2019-2020 (Intel)

• Tesla Model 3 2021 (Intel)

• Tesla Model Y 2020-2021 (Intel)

Variant B

• Tesla Model 3 2022-2023 (AMD with HW3)

• Tesla Model Y 2022-2023 (AMD with HW3)

Variant C

• Tesla Model Y 2022-2023 (AMD with HW4)

Variant D (Coming Soon)

• Tesla Model 3 2024+ (Highland)

Dip Switch Settings

PIN	1	2	3	4	5	6	7	8
OFF (UP)	LVDS Mode ON	HDMI Mode ON	Intel Atom MCU	Normal Display	Sleep by CAN and B+	Reserved	Reserved	LHD
ON (DOWN)	LVDS Mode SKIP	HDMI Mode SKIP	AMD Ryzen MCU	"Rev H" Display*	Sleep by Car ACC	Reserved	Reserved	RHD

Please make sure to disconnect the power cable of the interface and reconnect the power cable again to apply the dip switch changes.

Texts highlighted in Orange are default value. For Dip Switch 3 / 8, please choose according to your car variation.

*For Dip Switch 4, please try to set it to OFF (UP) first. If the display does not work correctly, try to switch to ON (DOWN).

Factory Settings

Button	Press	Action
◀	Long Press	Access to the Factory Menu
OK	Short Press	Selection or Mode Change
▶	Long Press	Factory Reset
▲	Short Press	Moving Upward
▼	Short Press	Moving Downward
MENU	Short Press	Back
PIP	Short Press	PIP (Split Screen) Mode Change

Display Color

Brightness : Adjust Brightness level (0 ~ 100)

Contrast : Adjust Contrast level (0 ~ 100)

Saturation : Adjust Saturation level (0 ~ 100)

Vehicle Option

Car Model : Select car model type (Model 3 / Model Y)

Rear Detect : Select rear camera detection type (CAN / LAMP)

Auto Fcam : OEM or Ext. Front camera display time setting after gear R to D (OFF / 3sec / 5sec / 10sec / 15sec) [Future Use]

Setup System

System Reset : Factory Reset (NO / YES)

LVDS Model : Navigation model selection

• QROIX-HD : 1280x720

• M2C+ WVGA : 800x480

• GNOM-WVGA : 800x480

HD Model : 360 and Navigation model selection

• QROIX-HD : 1280x720

• KAZON : 1280x720

• KAZON+TURN : 1280x720 + Left/Right Turn Signal

Side Cam Detect : Side camera wire detection (OFF / BOTH-SIDE / LEFT-SIDE / RIGHT-SIDE)

Setup Utility

Fcam/Rcam/Left/Right cam Format : Camera format selection when Auto Detection set OFF (1080P25 / 720P30 / NTSC / PAL)

Auto Detect : Camera format auto detection (ON / OFF)

Parking Assistance

Guide H-Offset : Adjust Parking Guide Line left/right (0~40)

Guide V-Offset : Adjust Parking Guide Line up/down (0~40)

Guide Display : Parking Guide Line display setting (PAS-NONE / PAS-OFF / PAS-ON)

Guide Option : Parking Guide Line type selection (WIDE1 / WIDE2 / WIDE3)