Model S/X Lighted Applique App (v1)
This is the user manual for Lighted Applique App for v1 kit only. App can be purchased from the below links. For MARK 2.0 kit owners, please DO NOT purchase this app.
Last updated
This is the user manual for Lighted Applique App for v1 kit only. App can be purchased from the below links. For MARK 2.0 kit owners, please DO NOT purchase this app.
Last updated
Once you open the App, you can see the following screen. Click the "Search" button to see the list of devices available.
Look for the device named "TeslaStrip" and click on Connect
After the device is connected, click the "Arrow" button to fetch the settings.
Now on the setting page, you can toggle each effect on and off:
LIGHT: When turned off, the light board will be turned off and will not display.
PARK: when turned on, PARK will display a park effect after car is off.
REVERSE: When turned on, reverse effect will be displayed in "R" gear.
BRAKE: When turned on, a bright red light will be displayed when brake is pressed (or when regenerative brake is active)
CHARGE: When turned on, a flashing green light will be display when the car is charging. (The emptier the battery, the faster the light flashes)
BLINKER: When turned on, right turn signal, left turn signal and emergency flash light effect will be on when turn signal is engaged.
RUNNING LIGHT: When turned on, the light board will display a solid color when the car's headlight is on.
BRIGHTNESS SETTING: Set the general brightness of the light board.
Some effect have additional settings, you can press the > button to look at the settings.
Activation Minute: The minute after car Off to display the Park Effect. For example, if the setting is 2, then the park effect will display 2 minutes after car is OFF.
Timeout Hour: The number of hour to display the Park Effect. For example, if the setting is 2, then the Park Effect will display for 2 hours before going off.
Park Effect: The list of effect to choose for park effect.
Color: The color to choose for displaying the Park Effect. If Rainbow effect is chosen, the Color option will not be available.
Always use the "Save" button on the bottom right to save the settings. Make sure "Save Successful" is displayed to make sure the settings is applied.
