FusionLink (Integrated CarPlay & Android Auto System)

LogoModel 3/Y FusionLink (Integrated CarPlay & Android Auto System) – EVOffer

Product Compatibility

Variant A

Variant B

Variant C (Coming Soon)

Packing List

  1. Integrated CarPlay System ECU

  2. LVDS Cable

  3. LVDS Extension Cable

  4. Power and CAN Cable (For Intel MCU)

  5. Power and CAN Cable (For AMD MCU)

Installation

Step 1 - Run the Power and CAN Harness

The ECU harness includes 2 sets of Power and CAN Cable. Depending on the model year of your car, you'll connect the power, ground, and CAN Bus in different locations:

For Variant A (Intel)

Refer to "Method 1 - Power & CAN Connection on Intel MCU" from the following guide.

For Variant B (AMD)

Refer to "Method 3 - Power & CAN Connection below Right A-Pillar" from the following guide.

LogoPower and CAN Connection | EVOffer Installation Guide

Step 2 - Connect the LVDS Cable

Remove the bottom cover on the passenger side (FRONT RIGHT for LHD cars / FRONT LEFT for RHD cars). It is secured by 3 push pins.

Disconnect the LVDS connector from the MCU. Connect to to the LCD Extension Cable we provided.

Connect the LCD Cable to the OEM LVDS port.

Connect the other side to the ECU.

Step 5 - Set Up the System

You need to test the dip-switch settings before tidying up the trim pieces.

Try Setting 1 first and see if you can click the CarPlay icon. If not, try setting 2, hold the scroll wheels on the steering wheel for 15 seconds to reboot the car and test again.

Please notice that PIN 8 is used to set LHD / RHD option.

LHD Countries: United States, Canada, Mexico, Most European Countries (except UK, Ireland), South Korea, Taiwan, etc.

RHD Countries: Australia, Japan, Thailand, United Kingdom, Ireland, Hong Kong, Macau, Singapore, Malaysia, India, etc.

PIN
1
2
3
4
5
6
7
8
9
10

Setting 1

⬇️

⬇️

⬆️

⬇️

⬇️

⬇️

⬆️

⬆️ (RHD) ⬇️ (LHD)

⬆️

⬆️

Setting 2

⬆️

⬆️

⬇️

⬇️

⬇️

⬇️

⬆️

⬆️ (RHD) ⬇️ (LHD)

⬆️

⬆️

PreviousFirmware UpdateNextGear and Turn Signal Stalk

Last updated